RCA RC124 Bedienungsanleitung PDF herunterladen

lighted candled, should be placed

on the apparatus.

• Attention should be drawn to the

environmental aspects of battery

disposal.

• The use of apparatus in moderate

climates.

This is class II

equipment designed

with double or

reinforced insulation

so it does not require

a safety connection to

electrical earth (US:

ground).

Plugging in for power

AC OUTLET POWER SUPPLY:

120 V ~ 60 Hz

The AC power plug is

polarized (one blade is

wider than the other)

and only ﬁ ts into AC

power outlets one

way. If the plug will

not go into the outlet

completely, turn the plug over and try

to insert it the other way. If it still does

not ﬁ t, contact a qualiﬁ ed electrician

to change the outlet, or use a different

one. Do not attempt to bypass this

safety feature.

ADDITIONAL SAFETY INFORMATION

• Apparatus shall not be exposed to

dripping or splashing and no objects

ﬁ lled with liquids, such as vases,

shall be placed on the apparatus.

• Always leave sufﬁ cient space around

the product for ventilation. Do

not place product in or on a bed,

rug, in a bookcase or cabinet that

may prevent air ﬂ ow through vent

openings.

• Do not place lighted candles,

cigarettes, cigars, etc. on the

product.

• Connect power cord only to AC

power source as marked on the

product.

• Care should be taken so that objects

do not fall into the product.

• Do not attempt to disassemble

the cabinet. This product does

not contain customer serviceable

components.

• The marking information is located

at the bottom of apparatus.

• To be completely disconnect the

power input, the mains plug

adaptor of apparatus shall be

disconnected from the mains.

• Mains plug is a disconnect device.

The mains plug should not be

obstructed OR should be easily

accessed during intended use.

• The ventilation should not be

impeded by covering the ventilation

openings with items such as

newspaper, table-cloths, curtains etc.

• No naked ﬂ ame sources, such as

prong. The wide blade or the third

prong is provided for your safety. If

the provided plug does not ﬁ t into

your outlet, consult an electrician

for replacement of the obsolete

outlet.

• Protect the power cord from being

walked on or pinched particularly at

plugs, convenience receptacles, and

the point where they exit from the

apparatus.

• Only use attachments/accessories

speciﬁ ed by the manufacturer.

• Use only

with the cart,

stand, tripod,

bracket, or table

speciﬁ ed by the

manufacturer,

or sold with

the apparatus. When a cart is used,

use caution when moving the cart/

apparatus combination to avoid

injury from tip-over.

• Unplug this apparatus during

lightning storms or when unused

for long periods of time.

• Refer all servicing to qualiﬁ ed

service personnel. Servicing is

required when the apparatus has

been damaged in any way, such

as power-supply cord or plug is

damaged, liquid has been spilled

or objects have fallen into the

apparatus, the apparatus has been

exposed to rain or moisture, does

not operate normally, or has been

dropped.

user manual

manual de usuario

EN/E

It is important to read this user manual prior to using your new product for the ﬁ rst time.

Es importante leer este manual antes de usar por vez primera su equipo.

RC124

PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE

IMPORTANT SAFETY INSTRUCTIONS

Before you begin

General controls

Clock

FCC information

Radio Clock projector

Room temperature

Wake function

Some of the following information may

not apply to your particular product;

however, as with any electronic product,

precautions should be observed during

handling and use.

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near

water.

• Clean only with dry cloth.

• Do not block any ventilation

openings. Install in accordance with

the manufacturer’s instructions.

• Do not install near any heat sources

such as radiators, heat registers,

stoves, or other apparatus (including

ampliﬁ ers) that produce heat.

• Do not defeat the safety purpose

of the polarized or grounding-type

plug. A polarized plug has two

blades with one wider than the

other. A grounding type plug has

two blades and a third grounding

Refer to the Clock section for

instructions on properly setting the

Clock.

Battery back-up operation

• This clock radio is equipped with

a time keeping system that is

powered with battery (CR2032)

(not included). The power failure

protection circuit will not operate

unless battery is installed.

• When normal household power

is interrupted, or AC line cord

is unplugged, the battery will

power the clock radio to keep

track of time and alarm settings

programmed into memory.

• Normal operation will resume after

AC power is restored so you will not

have to reset the time or the alarm.

Note: It is recommended to replace the

batteries at least once per year even if

no power failures have occurred.

To install the battery:

1. Remove the screw on the battery

door at the bottom of the unit.

2. Slide the battery door in the

direction shown below.

3. Take note on the battery polarity

and place a CR2032 battery inside.

4. Replace the battery door and install

the screw.

Power failure indicator

If you have not installed the button

cell battery in the product, or the

battery runs out while AC power is

disconnected, the clock and alarm

settings will be lost. After AC power

is reconnected, the time 12:00 will be

shown on the LCD screen to indicate

that power was interrupted and you

should readjust the time settings.

“Are you observing daylight savings

time at this moment? If so, ﬁ rst see

“Select daylight saving” section below.

Set clock manually

1. Press and hold MODE until the year

ﬂ ashes on the display.

2. Press / to set the value. The

value increases or decreases quickly

when you press and hold the

button.

3. Press MODE to conﬁ rm. Repeat step

2 to set month, day, 12H/24H, hour

and minute.

4. To save and exit the date and time

setting mode, press MODE.

Select daylight saving

This convenient feature provides a

simple way to change your clock when

daylight savings time starts or ends.

1. Press and hold to toggle

between daylight saving on and off.

2. A

shows on the display when

you turn on the daylight saving

time.

Display brightness

• Slide the DIMMER switch to adjust

the desired brightness level.

• When AUTO OFF is selected, the

display will be

• turned on automatically when

alarm sounds.

• turned off automatically when

sleep function is activated.

• turned off automatically when in

clock mode.

Listening to the radio

To turn on or off radio:

• Press

to turn on/off the radio.

Radio frequency and radio band

icon will be shown for a while and

then the clock time will be shown.

To select radio band (AM/FM):

• Press BAND to select radio band.

The selected radio band icon lights

on the display.

To tune frequency:

• Use the tuning knob to tune the

frequency. The selected frequency

shows on the display.

FM Antenna

This unit is equipped with an FM

antenna at the back. Uncoil the antenna

to its full length for best reception. Tape

the end of the antenna onto the wall if

possible to improve reception.

AM antenna

A built-in ferrite rod antenna eliminates

the need for an outside antenna for

AM reception. Rotating the unit slightly

may improve reception of distant AM

stations.

Set wake time

1. Press and hold AL. TIME until the

hour of alarm 1 ﬂ ashes and

lights on the display.

2. Press / to set the value. The

value increases or decreases quickly

when you press and hold the

button.

3. Press AL. TIME to conﬁ rm and

move to minute.

4. Press

/ to set the value. The

value increases or decreases quickly

when you press and hold the

button.

5. Press AL. TIME to conﬁ rm. Press

/ to select weekday settings

as follows:

1-1: Once per week

1-5: Monday to Friday

1-7: Whole week

6-7: Saturday and Sunday

6. Press AL. TIME to conﬁ rm. Hour of

alarm 2 will ﬂ ash and

will

light on the display. Repeat step 2

to 5 to set alarm 2.

Select the wake source

You may wake to the radio or buzzer.

1. Set a wake time (refer to the above

instructions).

2. Press AL. 1

or AL. 2

select wake by radio (

) or wake by

buzzer ( ).

Disable the wake function

• Press AL. 1

or AL. 2

until

no corresponding wake icon (

2, 1, 2) shows on the display.

Stop the Alarm Sounding

To silence the wake function

momentarily:

• Press SNOOZE/SLEEP. The wake

icon ( 1, 2, 1 or 2) will ﬂ ash

and the alarm will sound again

when the snooze period (9 minutes)

is over. Snooze function can be used

repeatedly up to 30 minutes. After

this, the wake function will turn off

until the next day.

To stop the wake function:

• Press

AL. 1

AL. 2

. The alarm will be on

again the following day or the

next week, depends on the alarm

weekday settings.

Sleep function

To set the sleep time:

1. When listening to radio, press

SNOOZE/SLEEP repeatedly to cycle

among the sleep time available

(90min, 60min, 30min and 15min).

When you ﬁ rst set the sleep time,

the sleep time is default to 90 min.

2. When the desired sleep time is

selected, release SLEEP and wait for

about 5 seconds, the sleep time is

now set. The icon SLP lights on the

display.

To change sleep time:

• Press SLEEP repeatedly to select

another sleep time.

To cancel the sleep mode:

• Press

to cancel the sleep mode.

To select line in mode:

1. Connect your auxiliary source (e.g.

mp3 player) to the LINE IN jack at

the back of the unit with an audio

cable (not supplied).

2. If necessary, press

to turn on the

unit. Adjust the auxiliary player

to mid-range volume and adjust

the master volume on the unit.

Do not turn the volume of the

auxiliary player too high as this may

affect the sound quality. For other

playback operations, control them

on your auxiliary player.

Line in

12 Month Limited Warranty

Applies to RCA Clock Radios

AUDIOVOX ACCESSORIES CORP. (the

Company) warrants to the original retail

purchaser of this product that should

this product or any part thereof, under

normal use and conditions, be proven

defective in material or workmanship

within 12 months from the date of

original purchase, such defect(s) will be

repaired or replaced with reconditioned

product (at the Company’s option)

without charge for parts and repair

labor.

To obtain repair or replacement

within the terms of this Warranty, the

product is to be delivered with proof

of warranty coverage (e.g. dated bill

of sale), speciﬁ cation of defect(s),

transportation prepaid, to the Company

at the address shown below.

This Warranty does not extend to the

elimination of externally generated

static or noise, to correction of

antenna problems, loss/interruptions of

broadcast or internet service, to costs

incurred for installation, removal or

reinstallation of product, to corruptions

caused by computer viruses, spyware or

other malware, to loss of media, ﬁ les,

data or content, or to damage to tapes,

discs, removable memory devices or

cards, speakers, accessories, computers,

computer peripherals, other media

players, home networks or vehicle

electrical systems.

This Warranty does not apply to any

product or part thereof which, in the

opinion of the Company, has suffered

or been damaged through alteration,

improper installation, mishandling,

misuse, neglect, accident, or by removal

or defacement of the factory serial

number/bar code label(s). THE EXTENT

OF THE COMPANY’S LIABILITY UNDER

THIS WARRANTY IS LIMITED TO THE

REPAIR OR REPLACEMENT PROVIDED

ABOVE AND, IN NO EVENT, SHALL THE

COMPANY’S LIABILITY EXCEED THE

PURCHASE PRICE PAID BY PURCHASER

FOR THE PRODUCT.

This Warranty is in lieu of all other

express warranties or liabilities. ANY

IMPLIED WARRANTIES, INCLUDING

ANY IMPLIED WARRANTY OF

MERCHANTABILITY, SHALL BE LIMITED

TO THE DURATION OF THIS WRITTEN

WARRANTY. ANY ACTION FOR BREACH

OF ANY WARRANTY HEREUNDER

INCLUDING ANY IMPLIED WARRANTY

OF MERCHANTABILITY MUST BE

BROUGHT WITHIN A PERIOD OF 24

MONTHS FROM DATE OF ORIGINAL

PURCHASE. IN NO CASE SHALL THE

COMPANY BE LIABLE FOR ANY

CONSEQUENTIAL OR INCIDENTAL

DAMAGES FOR BREACH OF THIS OR

ANY OTHER WARRANTY. No person or

representative is authorized to assume

for the Company any liability other than

expressed herein in connection with the

sale of this product.

Some states do not allow limitations on

how long an implied warranty lasts or

the exclusion or limitation of incidental

or consequential damage so the above

limitations or exclusions may not apply

to you. This Warranty gives you speciﬁ c

legal rights and you may also have

other rights which vary from state to

state.

Recommendations before returning

your product for a warranty claim:

• Properly pack your unit. Include

any remotes, memory cards, cables,

etc. which were originally provided

with the product. However DO NOT

return any removable batteries,

even if batteries were included

with the original purchase. We

recommend using the original

carton and packing materials. Ship

to the address shown below.

• Note that product will be returned

with factory default settings.

Consumer will be responsible to

restore any personal preference

settings.

Audiovox Electronics Corp.

Attn: Service Department.

150 Marcus Blvd.

Hauppauge N.Y. 11788

1-800-645-4994

For Canada Customers, please ship to:

Audiovox Return Centre

c/o Genco

6685 Kennedy Road,

Unit#3, Door 16,

Mississuaga, Ontario

L5T 3A5

DATE/TIMEAL.SET DST

press & hold

Warranty information

To view alarm 1 time or alarm

2 time, press AL. TIME.

To listen to the radio, remove

the audio cable from the LINE

IN jack.

]

Portable Cart Warning

Important battery

precautions

• Any battery may present a risk of

ﬁ re, explosion, or chemical burn

if abused. Do not try to charge a

battery that is not intended to be

recharged, do not incinerate, and

do not puncture.

• Non-rechargeable batteries, such as

alkaline batteries, may leak if left in

your product for a long period of

time. Remove the batteries from the

product if you are not going to use

it for a month or more.

• If your product uses more than one

battery, do not mix types and make

sure they are inserted correctly.

Mixing types or inserting incorrectly

may cause them to leak.

• Discard any leaky or deformed

battery immediately. They may

cause skin burns or other personal

injury.

• Please help to protect the

environment by recycling or

disposing of batteries according to

federal, state, and local regulations.

WARNING: The battery (battery or

batteries or battery pack) shall not

be exposed to excessive heat such as

sunshine, ﬁ re or the like.

Note: This equipment has been tested

and found to comply with the limits

for a Class B digital device, pursuant

to Part 15 of FCC Rules. These limits

are designed to provide reasonable

protection against harmful interference

in a residential installation. This

equipment generates, uses, and can

radiate radio frequency energy and, if

not installed and used in accordance

with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee

that interference will not occur in a

particular installation. If this equipment

does cause harmful interference to

radio or television reception, which

can be determined by turning the

equipment off and on, the user is

encouraged to try to correct the

interference by one or more of the

following measures:

• Reorient or relocate the receiving

antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an

outlet on a circuit different from

that to which the receiver is

connected.

• Consult the dealer or an

experienced radio/TV technician for

help.

v1.0 (1.0.1.0) (EN/E)

111 Congressional Blvd., Suite 350

Carmel, IN 46032

Trademark(s) ® Registered

Printed in China

Visit http://store.audiovox.com to find the best

accessories for your products.

Illustrations contained within this

publication are for representation only

and subject to change.

The descriptions and characteristics

given in this document are given as

a general indication and not as a

guarantee. In order to provide the

highest quality product possible,

we reserve the right to make any

improvement or modiﬁ cation without

prior notice.

Changes or modiﬁ cations not expressly

approved by Audiovox could void

the user’s authority to operate the

equipment.

This Class B digital apparatus

complies with Canadian ICES-003.

Cet appareil numérique de la classe

B est conforme à la norme NMB-003

du Canada.

DATE/TIMEAL.SET DST

press & hold

Top view

Right view

Back view

Front view

AL. TIME – Enter alarm setting mode;

view alarm 1 time or alarm 2 time

– Adjust values; view month and

day; switch between temperature unit

(°C / °F)

– Adjust values; view year; turn on/

off DST

MODE – Enter date and time setting

mode

– Turn on/off the radio

SNOOZE/SLEEP – Turn off the wake

function momentarily (9 minutes);

turn on/off the Sleep timer

BAND – Select radio band

AL. 1

– Activate or change alarm

1 settings

AL. 2

– Activate or change alarm

2 settings

RESET – Reset the unit’s settings

LINE IN – Line in jack

FOCUS – Adjust the focus of the

projected image

180

FLIP – Rotate the projected

image by 180

PROJECTION ON/OFF – Turn the

projector on or off.

DIMMER – Adjust display brightness

- VOLUME + –Adjust volume

TUNING – Adjust radio frequency

A time projector is located on the

left side of the unit. Clock time can

be projected onto ceilings or walls

in a darkened environment for easy

reference. The distance between the

projector and the projected surface

should be within 3 to 9 feet.

Rotate the FOCUS to adjust the focus of

the projected image.

Press PROJECTION ON/OFF to turn on

or off the projector.

To rotate the projected image, press

180

FLIP repeatedly.

This unit is equipped with a

temperature sensor for room

temperature measurement.

To switch between the temperature unit

°C/°F, press and hold .

temperature

sensor

FM antenna

Reset

All the clock and alarm

settings will be lost.

When you replace the battery or the

unit is not performing as expected,

use a non-metal pointed object (e.g.

toothpick) to press the reset button at

the back of the unit. All settings will be

returned to the default value.

Ecology

Help protect the environment - we

recommend that you dispose of used

batteries by putting them into specially

designed receptacles.

CAUTION

Danger of explosion if battery is

incorrectly replaced. Replace only with

the same or equivalent type.

Electrical consumption

Power Supply: 120 V ~ 60 Hz

Power Consumption: 5 Watts

View date

• To view the year, press . Wait

for about 5 seconds or press to

return to clock mode.

• To view month and day, press

. Wait for about 5 seconds or

press to return to clock mode.

1 2 3 4

IMPORTANT SAFETY INSTRUCTIONS 1

Inhaltsverzeichnis

Seite 1 - IMPORTANT SAFETY INSTRUCTIONS

lighted candled, should be placed on the apparatus.• Attention should be drawn to the environmental aspects of battery disposal.• The use of apparat

Seite 2

lighted candled, should be placed on the apparatus.• Attention should be drawn to the environmental aspects of battery disposal.• The use of apparat

Seite 3

lighted candled, should be placed on the apparatus.• Attention should be drawn to the environmental aspects of battery disposal.• The use of apparat

Seite 4

lighted candled, should be placed on the apparatus.• Attention should be drawn to the environmental aspects of battery disposal.• The use of apparat

Kommentare zu diesen Handbüchern

Keine Kommentare

RCA RC124 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Wecker RCA RC124 herunter. RCA RC124 User's Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Wecker RCA RC124