Rca RS2135i Bedienungsanleitung PDF herunterladen (Seite 7)

Display and Settings

Display

Setting the Clock

1. Press and hold CLOCK on the remote

control until the hour flashes on the

display.

2. Press / to set the hour and then

press CLOCK to shift to minute digits.

3. Press / to set the minute.

4. Press CLOCK to save settings. Or press

TUNE/PRESET to cancel the setting.

Timer and Program Recording

You can turn on/off the unit or record TUNER

at preset times by setting the timer.

You can use Program Recording to preset the

unit to record your favorite radio program.

When setting the timer, choose TUNER REC as

the source to record radio at the preset time.

Ensure there is adequate memory in the USB

device connected.

Setting the Timer

1. Press and hold TIMER on the remote

control until Timer On and the clock hour

flash on the display.

2. Set the Timer ON setting. Press / to

set the hour and then press TIMER to shift

to minute digits.

3. Press / to set the minute.

4. Press TIMER to change to Timer Off

setting with clock time flashing. Repeat

steps 2 & 3 for timer off time setting.

5. Press TIMER to select source. Press /

to select TUNER/TUNER REC/DISC/USB/iPod.

If TUNER REC is selected, press / to

select the preset station.

6. Press TIMER to set volume. Adjust

VOLUME CONTROL to select desired

volume level.

7. Press TIMER to save settings. Press TUNE/

PRESET to cancel setting. The timer is

automatically activated once timer setting

is saved.

Activating the Timer

Press TIMER to turn on/off the alarm. The timer

icon is displayed when timer is activated.

Sleep Mode

You can select the time interval in minutes

before the unit turns off automatically.

Press SLEEP to select among OFF, 120, 90, 60,

45, 30, 15 and 5 minutes.

The SLEEP icon lights on the display when sleep

mode is activated.

View and Adjust Remaining Sleep Time

When sleep is activated, press SLEEP once to

view remaining sleep time. Press again to

change the time.

Showing Demonstration

Press DEMO to turn on/off demonstration

mode.

Source indication

Play Mode status

CD Tray Status:

Lights up when

loaded. Flashes

when playing.

Note: Sleep is automatically

de-activated when the unit is

turned off.

Sound Features

Volume Control

Turn the volume control on the main unit or

press VOL / on the remote control to adjust

volume level. The volume level shows briefly on

the display.

Bass Boost

Press B.BOOST to turn on/off boosting the bass

frequency. The BASS BOOST icon displays when

it is activated.

Muting Sound

Press on the remote to mute the sound.

When MUTE is on, the symbol flashes.

Using Preset Equalizer Curves

Press EQ to toggle among FLAT, ROCK, POP,

JAZZ, CLASSIC and CUSTOM. The display shows

your selection briefly and the relative icon

lights on the display.

Creating a Custom Curve

1. Press EQ to select CUSTOM mode.

2. While CUSTOM is displayed, press /

to cycle among displayed bass and treble

range levels.

3. While BAS and TRE is displayed, adjust

volume control to set the associated gain

between -10 and +10.

4. Press EQ to save setting and exit.

CD and mp3 Disc Playback

Loading Discs

1. Press DISC 1 /2 /3 /4 /5 on the

main unit to open the desired disc tray.

2. Insert a disc with label facing up.

3. Press the same DISC key to close the

disc tray, or press a different DISC key

to open a different disc tray directly.

4. Repeat steps 2-4 to load discs in all the

disc trays.

The occupied disc tray icons displays and the

current disc icon flashes on the display.

If the disc is a mp3 / WMA CD, the respective

MP3 and WMA icon will be displayed.

Playing Discs

To play all discs in the disc tray

Press in stop mode to begin playback.

To play a specific disc in the disc tray

• From other modes (e.g. TUNER), press

DISC 1 – DISC 5 to play the

corresponding disc. If there is no disc in

the corresponding disc tray, the next

occupied tray will be played.

• In CD mode, press SKIP DISC to play the

next available disc.

Pause Discs

Press during playback to pause disc. Press

again to resume.

Play and load simultaneously

While playing one disc, you can press DISC

to open or close other disc trays to load or

change disc without interrupting the playback.

Stop Playback

During playback, press TUNE/PRESET to stop

playback. The unit returns to navigation mode

briefly (approximately 10 seconds) before

entering stop mode.

Tips:

• See pages 19 – 20 for details on

Navigation Mode.

• In CD stop mode, press SELECT/ to

enter navigation mode and show disc

menu.

• In CD navigation mode, press /BACK

to return to stop mode.

11 12

mp3 WMA PROGRAM

STEREO EQ B.BOOST SLEEP

RDS

INTRO REPEAT 1ALL DISC S

To play a specific track in the disc

Press / to select the track and press to

start playback.

1 2 3 4 5 6 7 8 9 10 11 12 13

Kommentare zu diesen Handbüchern

Keine Kommentare

Rca RS2135i Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Akustik Rca RS2135i